090822Put in my 3max 16mm rear ARB last sat, had to cut off my muffler + reposition it
Original exhaust & piping location; muffler was right in the path of the ARB
Beefy looking mounts
Dizzying assortment of bushes, screws
Muffler gone! Note the two new brackets screwed on
oh dear, these screws & washers are gonna add lotsa creak o.O
completed bar
new muffler position; in case potential future 3max users wonder where they gonna stuff their mufflers
090829 Here's photos of my front UR ARB, did them last Sat
Just to clarify, I drive a 1.0 myvi which does not come with the stock / oem ARB.
Mine is a 23mm version, stock should be 25mm
Was installed by the Sifu's @ UR's new factory in Kg Baru Cheras
Anyway, it helped to reduce my laptime in Sepang from 3:23 to 3:15
This is what you get for paying rm480++
These two links cost a whopping RM50 each :s
Nicely greased to prevent squeaks
Mounting point is solid, to the chassis; note the 4 screws
Si fu is on the left
The Bracket welded onto the lower arm, this is before it's painted
With a nice coat now..
View from the rear.. that's the 3max ARB at the back
Nice view from the front
%29.JPG
090912 - Steel Braided HoseThis and new Dot4 fluid made quite a difference in braking
Although I didn't quite need it, but it's great assurance in Sepang
090920 - Short ShifterThis short shifter was a birthday present to me, complete with a nice knob
It's adjustable, so you can see that the ball can be moved
